Diecast machine heads 2 x 3, for acoustic guitar
- chrome finish

2L + 2R Machine heads for Ukulele 
- Open gear w/ white plastic knobs & standard single-hole post 
- 1/4" dia. pegholes required.

Den innovative WS-70 trådløse senderen og mottakeren er det ideelle tilbehøret for enhver musiker. Dette 
toppmoderne trådløse systemet sikrer at musikken din høres med enestående klarhet og pålitelighet. Med avansert 
UHF digital overføringsteknologi tilbyr det en sterk støyfri, lav latens og en imponerende 
overførings avstand på opptil 50 meter.

- Avansert UHF digital overføringsteknologi
- Krystallklar lyd uten avbrudd
- Lyd overføring opptil 50 meter
- Innebygd oppladbart batteri: Opptil 6 timers kontinuerlig bruk
- Enkel overvåking av batterilevetid
- Mindre enn 2ms for sømløs lyd
- Koble til opptil 100 enheter uten forstyrrelser 

Dynamisk område: =90 dB
Kanal: 100 kanaler
Signal-til-støy-forhold: =85 dB
Forsinkelse: =2 ms
Overføringsavstand: Opptil 50 meter
Frekvensområde: 500-527 MHz
Arbeidstid: 6 timer
Ladetid: 2 timer (5V 1A)

Superlux PRA383DXLR

Condenser microphone

Clip on microphone

PRA383DXLR TA3F connector for PS418D preamp (either phantom power or battery)

Especially suitable for trumpets
Characteristic: Cardioid
Frequency response: 40 Hz - 18000 Hz
Sensitivity: 8.0 mV/Pa
Impedance: 200 Ohm
Cable length 130 cm
Weight: 160 g
XLR output
Dimensions (DxL): 20 x 150 mm
Includes power supply with battery supply

Superlux S241

spesifikasjoner

Users guide
1/2" True Condenser
The S241 is greatly appreciated by leading sound engineers because it is based on 
professional craftsmanship and top quality standards. The S241 is a 1/2” goldevaporated 
diaphragm microphone with an inter-changeable capsule and low noise microphone 
pre-amplifier circuits. Its modular capsule design allows the user to change from 
cardioid to omni polar pattern as needed. The S241 is an ideal candidate for 
capturing the transient sounds from acoustic guitars, snare drums, hi-hats and 
overheads. All these features make the S241 a great  tool for rental companies 
as standard equipment.

Features:
    1/2” 3µm thin film diaphragm
    Flat and wide response
    Modular capsule design
    -10 and -20dB PAD settings
    2nd order 75Hz and 150Hz switchable low cut filters.
    Laser engraved serial numbering 

Application:
    Pro recording studio
    Live recording
    Vocals
    Strings
    Acoustic guitar
    Piano
    Brass
    Woodwinds
    Percussions

Type: True condenser, Ø1/2" (Ø12.7 mm)
Polar Pattern: Cardioid, omni (option)
Low Frequency Filter: 75 Hz, 150 Hz
Pad: -10, -20 dB
Sensitivity: -35 dBV/Pa (17.8 mV)
Output Impedance: 200 O
Min. Load Impedance: 1,000 O
S/N Ratio: 78 dB
Equivalent Output Noise: 16 dB
Max. SPL: 143 dB SPL
Dynamic Range: 127 dB
Power Requirements: 48V DC, 3 mA
Finish: Titanium grey
Connector: XLR3M
Dimensions: Ø22 × 155 mm(Ø0.87" × 6.1")
Net Weight: 220 g (7.8 oz)
Accessories Furnished: HM40 shock mount;YA2 threaded adapter;S09F windscreen;HM43 metal
mesh pop screen
Optional Accessories: PS2A phantom power supply;HM26B shock mount;Omni capsule
Packaging: A3 protective carrying case Colorful outer packaging